Breweries & Distilleries Epoxy Flooring in Columbus, Ohio

The system we recommend and why

Urethane cement or anti-slip epoxy with drain detailing

Breweries and distilleries need a floor that gives staff grip on constantly wet floors, handles acidic spills and hot washdowns, and takes the abuse from kegs and forklifts. Urethane cement or anti-slip epoxy with drain detailing does all of that and cleans up fast.

How it goes down

1. 1

   Mechanically prepare the slab and assess moisture and drain conditions.

2. 2

   Repair cracks and detail drains and slopes so liquid moves off the floor.

3. 3

   Apply urethane cement for high-washdown areas, or anti-slip epoxy for lighter use.

4. 4

   Form cove base in production and tank areas for a seamless, washable transition.

5. 5

   Apply a chemical-resistant topcoat rated for beer, wine, and cleaning acids.

6. 6

   Add aggressive anti-slip texture in constantly wet zones.

What to ask any breweries & distilleries floor installer

Use this checklist on every quote. The right installer answers these clearly; the wrong ones dodge them.

• Do you install urethane cement, or only standard epoxy?

• What anti-slip texture do you use for constantly wet floors?

• How do you detail drains and slope the floor so liquid moves off it?

• Is the topcoat resistant to beer, wine, and our cleaning acids?

• Do you form cove base in production and tank areas?

• Can you work around our production and canning schedule?

When epoxy is the wrong choice

Standard epoxy without anti-slip texture is the wrong choice in a brewery. Constantly wet floors become a slip hazard, and hot washdowns will blister standard epoxy over time.

The better alternative: Urethane cement or anti-slip epoxy with a textured topcoat and drain detailing is the correct system. For the heaviest washdown and tank areas, urethane cement is the safer bet.

How we keep your operation running

Breweries cannot shut production for long, so we work in phases and schedule around brewing, canning, and washdown cycles. Urethane cement cures fast — a section can be back in service in 24 to 48 hours. We coordinate with your team so the floor is ready before a washdown or production run.

What it costs in Columbus

Brewery and distillery floors in Columbus typically run $8 to $12 per square foot installed. Urethane cement, cove base, drain detailing, and anti-slip texture add cost. These are estimates — your real price depends on the slab, the system, and the wet-area detailing.

What moves the price

• Square footage and amount of cove base and drain detailing.

• Slab condition — moisture, cracks, and old coatings to remove.

• System type — urethane cement costs more than anti-slip epoxy.

• Schedule — nights, weekends, or tight shutdown windows.

These are estimates only. A real price comes after a free on-site walk-through.

Breweries & Distilleries epoxy flooring — your questions

Related industries

Related floor systems

Where we serve breweries & distilleries in Central Ohio

City-specific breweries & distilleries epoxy flooring pages, each with the problems, systems and scheduling that matter for that area.