breweries & distilleries floors built for Columbus
Columbus breweries and distilleries run constant wetness, acids, and cleaning chemicals across their production floors every day. The craft brewing scene along the downtown and industrial corridors handles heavy washdown, spilled beer, and cleaning acids that etch and break down bare concrete. The floor stays wet, gets slick, and drains poorly in the production area. The right system is urethane cement or a chemical-resistant epoxy with proper drainage: it handles constant wetness, resists acids and cleaning chemicals, and gives grip where floors stay wet. We connect Columbus brewery and distillery owners with a vetted local installer who phases the work so production keeps running.
Quick facts about brewery & distillery floors
- Constant wetness, acids and cleaning chemicals etch and break down bare concrete and standard epoxy.
- Urethane cement handles constant wetness, acids and washdown far better than epoxy.
- Proper drainage slope is part of a floor that works, not just a coat that looks good.
- A slip-resistant topcoat gives grip where floors stay wet.
- Phased installs by production area keep the brewery running.
Typical breweries & distilleries projects in Columbus
These are examples of the kinds of jobs we handle — not real client cases. Your floor gets its own free walk-through and written estimate.
Columbus craft brewery production floor
~6,000 sq ft · Production seven days
- The problem
- Constant wetness and acid spills had etched and stained the bare concrete. The floor was slick, hard to sanitize, and drainage was poor in the production area.
- Recommended system
- Urethane cement with a chemical-resistant topcoat and proper drainage slope for constant wetness and acids.
- Install plan
- Grind the slab, address drainage, apply urethane cement in production phases so the brewery keeps running, finish with a slip-resistant topcoat.
- Downtime approach
- Phased by production area — the brewery keeps running.
Downtown distillery production floor
~3,500 sq ft · Day production, evening tastings
- The problem
- Spilled spirits and cleaning acids had etched the slab. The floor was slick near the stills and hard to clean, and drainage was poor.
- Recommended system
- Urethane cement with a chemical-resistant, slip-resistant topcoat and drainage correction.
- Install plan
- Grind, address drainage, apply urethane cement in two phases over a weekend, return to full production Monday.
- Downtime approach
- Two phases — full production back Monday.
Columbus taproom and production facility
~4,500 sq ft · Production days, taproom evenings
- The problem
- The production floor was wet and slick from constant cleaning. The taproom floor was dull and showed every spill, and the two areas needed different systems.
- Recommended system
- Urethane cement in the production area, decorative flake epoxy in the taproom for appearance and easy cleaning.
- Install plan
- Phase the production area first with urethane cement, then coat the taproom with decorative flake epoxy overnight between service.
- Downtime approach
- Phased — production and taproom coated separately so both stay open.
Planning your install in Columbus
Columbus breweries and distilleries cannot afford long shutdowns, so we phase the work by production area. One area closes, cures, and reopens before the next goes offline. Urethane cement cures fast enough to return an area to service in about a day. Drainage slope gets sorted during the walk-through because standing water in a production area is a slip and sanitation risk. Winter installs are fine in a heated building, but thermal shock is a risk when hot washdown hits a cold slab, so we verify the slab is warm enough. If your facility is leased, landlord approval goes in the walk-through notes.