What line striping & safety marking covers
Line striping and safety marking is the painted layout on a finished floor — forklift lanes, pedestrian paths, OSHA safety zones, hazard borders, and parking stripes. On an epoxy floor, the striping is a durable paint or coating that bonds to the topcoat and stays bright under traffic. Clear marking keeps forklifts and people separated and makes a warehouse safer and more organized.
How the work goes
Here is what line striping & safety marking includes, step by step.
- 1
Walk the floor with you to plan lanes, paths, zones, and hazard areas.
- 2
Lay out the lines with tape or chalk to confirm the layout before painting.
- 3
Apply durable line striping paint or coating that bonds to the epoxy topcoat.
- 4
Add OSHA safety colors — yellow for caution, red for fire and hazard, etc.
- 5
Add ADA-compliant markings where required for accessibility.
Why this step matters
In a busy warehouse or plant, unmarked floors are a safety risk. Forklifts and pedestrians share the same space, and without clear lanes and zones, accidents happen. OSHA and insurance often require marked aisles and hazard zones. Line striping on an epoxy floor is durable and stays visible, so the layout stays clear for years instead of wearing off in months.
What goes wrong when this step is skipped
These are the failures we see when this work is done wrong or not at all.
Unmarked aisles — forklifts and pedestrians mix, raising the risk of accidents.
Faded or worn lines — the layout becomes unclear and unsafe over time.
Wrong colors — OSHA has standard colors for caution and hazard; using the wrong ones can fail an audit.
Lines that do not bond — cheap paint peels off the epoxy topcoat under forklift traffic.
No ADA markings — missing accessibility markings can fail an inspection.
What it costs in Columbus
Line striping in Columbus typically runs $1 to $4 per linear foot, depending on the line width and the paint. Standard warehouse lane striping is at the low end; OSHA safety zones with multiple colors and ADA markings are at the high end. Striping is often priced into a full floor install. These are estimates — your real cost depends on the layout.
What moves the price
Line length and width — longer and wider lines cost more.
Number of colors — OSHA zones with multiple colors cost more than single-color lanes.
ADA and compliance markings — required markings add cost.
Whether it is part of a full floor install or a standalone job.
These are estimates only. A real price comes after a free on-site walk-through.