warehouses & distribution floors built for Hilliard
Hilliard's light industrial and warehouse space along Cemetery Road and Hilliard-Rome Boulevard handles steady pallet-jack and delivery-cart traffic. The buildings are smaller than the big Columbus distribution centers, but the floors still take a daily beating — dusting concrete, joint cracks, and oil staining from delivery vehicles. Smaller does not mean easier: a dusty, stained floor in a Hilliard warehouse still slows your crew and looks worn to anyone who walks in. A commercial epoxy or polyaspartic coating seals the slab, cleans up fast, and holds up to daily traffic. We connect Hilliard warehouse and light-industrial owners with a vetted local installer who phases the work so the business keeps running.
Quick facts about warehouse & distribution floors
- Forklifts and pallet jacks are the main wear source — the system needs a high-build body coat and an abrasion-resistant topcoat.
- Concrete dust is a product-contamination risk; sealing the slab stops it at the source.
- Expansion joints and cracks should be repaired with a rigid polyurea filler before coating, or the coating cracks along the joint line.
- Built-in OSHA line striping for forklift lanes and pedestrian paths lasts far longer than taped lines.
- Light foot traffic in ~24 hours; full forklift traffic in 48-72 hours (faster with a polyaspartic topcoat).
Typical warehouses & distribution projects in Hilliard
These are examples of the kinds of jobs we handle — not real client cases. Your floor gets its own free walk-through and written estimate.
Cemetery Road light industrial warehouse
~12,000 sq ft · Day shift
- The problem
- Pallet jacks had worn the bare concrete dusty and rough. Joint cracks were spreading, and the floor was hard to keep clean.
- Recommended system
- High-build epoxy with joint repair and a urethane topcoat for daily traffic.
- Install plan
- Grind and repair cracks, coat in sections so the business keeps operating, finish with an abrasion-resistant topcoat.
- Downtime approach
- Sectioned — one area at a time, the rest stays open.
Hilliard-Rome Boulevard distribution unit
~20,000 sq ft · Two shifts
- The problem
- Delivery-vehicle oil had stained the dock approach, and the slab was dusting onto packaged goods.
- Recommended system
- Chemical-resistant epoxy with an oil-tolerant primer at the dock.
- Install plan
- Grind out oil, prime the dock, coat the full floor in three sections over a weekend.
- Downtime approach
- Weekend install — full traffic back Monday.
E-commerce pick-and-pack warehouse
~8,000 sq ft · Day shift, peak evenings
- The problem
- Cart traffic had polished the slab slick, and the floor had no marked pick paths, causing congestion.
- Recommended system
- High-build epoxy with a polyaspartic topcoat and a pick-path stripe.
- Install plan
- Grind, coat in two sections, stripe pick paths and packing zones after cure.
- Downtime approach
- Two sections — one per evening, full traffic by the next day.
Planning your install in Hilliard
Hilliard warehouses are often smaller and occupied, so we work in sections rather than closing the whole building. We plan the sequence around your delivery and operating schedule, and because the spaces are tight, we sort cart and pallet-jack routing before day one so you can keep picking and packing around the work. Winter installs are fine in heated units, but we verify the slab is warm enough for a solid bond. Most Hilliard warehouse floors need no permit for the coating, but if your unit is leased we confirm landlord approval during the free walk-through.