auto dealerships & showrooms floors built for Dublin
Dublin's auto dealerships and showrooms along Sawmill Road and the Bridge Street corridor run heavy foot traffic, vehicle display, and service-bay traffic across their floors every day. Showroom floors need a high-gloss, reflective finish that makes vehicles look their best, and service-bay floors need chemical resistance to oil, brake fluid, and hot tires. Bare concrete in a showroom looks dull and dusty, and bare concrete in a service bay stains and breaks down under fluid exposure. The right system is a high-gloss epoxy or polyaspartic topcoat in the showroom and a chemical-resistant epoxy in the service bays: it looks sharp, resists hot-tire pickup, and cleans up fast. We connect Dublin dealership managers with a vetted local installer who phases the work so the showroom stays open.
Quick facts about auto dealership & showroom floors
- Hot-tire pickup marks and dulls bare concrete — a high-gloss polyaspartic or quartz epoxy resists it.
- A reflective finish makes vehicles pop under showroom lighting.
- The system must hold up to daily vehicle and foot traffic without scuffing.
- Sectioned installs keep the showroom open during the work.
- Vehicle traffic is safe in about 24 hours with a fast-cure polyaspartic topcoat.
Typical auto dealerships & showrooms projects in Dublin
These are examples of the kinds of jobs we handle — not real client cases. Your floor gets its own free walk-through and written estimate.
Sawmill Road auto showroom
~7,000 sq ft · Daytime sales, seven days
- The problem
- The showroom floor was dull, dusty, and showed tire marks. The surface lacked the gloss and reflectivity that makes vehicles stand out, and hot-tire pickup was marking the floor.
- Recommended system
- High-gloss polyaspartic with a clear topcoat for reflectivity and hot-tire resistance.
- Install plan
- Grind and prep the slab, apply the system in sections overnight so the showroom stays open, return to full display after cure.
- Downtime approach
- Sectioned overnight — showroom stays open during the day.
Dublin dealership service bay
~5,000 sq ft · Day shift
- The problem
- Oil, brake fluid, and hot tires had stained and broken down the bare concrete. The floor was hard to clean and slick in the wet zones.
- Recommended system
- Chemical-resistant epoxy with an oil-tolerant primer and an abrasion-resistant topcoat.
- Install plan
- Grind out oil contamination, prime with an oil-tolerant primer, coat bay by bay so the shop keeps operating.
- Downtime approach
- Bay by bay — the service department stays open.
Bridge Street luxury showroom
~4,500 sq ft · By appointment, daytime
- The problem
- The showroom floor lacked the premium look the brand demands. The surface was dull and showed every tire mark and scuff.
- Recommended system
- Metallic epoxy with a high-gloss clear topcoat for a premium, reflective finish.
- Install plan
- Grind and prep, apply the metallic system over a weekend, return to full display Monday.
- Downtime approach
- Weekend install — full display back Monday.
Planning your install in Dublin
Dublin dealerships cannot close the showroom for long, so we work in sections overnight and between sales hours. We schedule around your display and service-bay hours and lock in which areas can go down on which nights. Showroom and service-bay systems are different, so we sequence them separately. Winter installs are fine in a heated building, but we verify the slab is warm enough for a proper bond. If your dealership is leased, landlord approval and any brand-standard requirements get sorted during the free walk-through.